Minolta Bizhub 36 Installation Manual page 5

X. Affixing the Label (IR Prohibited)
Affix the label (IR Prohibited) to the position shown
below.
Label (IR Prohibited)
XI. Affixing the label (Legal restrictions on
copying)
Affix the label (Legal restrictions on copying) to the
position shown below.
Note:
This step may not be performed depending on the
applicable marketing area.
8 mm
A3EW11A026AA
Label
A3EW11A027AA
XII. Loading the developer
1. Open the right door.
2. Remove the cover shown in the illustration.
(One screw)
Note:
• After removing the screw:
(1) Raise the cover slightly.
(2) Pull it out toward you.
• Do not touch, scratch, or otherwise damage the
photo conductor.
Photo
conductor
3. Disconnect the connector.
Note:
• Do not touch, scratch, or otherwise damage the
photo conductor.
• When pulling out the connector, use caution not
to break the cable.
E-5
(1)
(2)
A3EW11A015AA
A3EW11A016AA