EX800M
6.2.1
The maximum allowable blind-mate tolerance is ± 1.50 mm in the X-axis.
The maximum allowable blind-mate tolerance is ± 1.00 mm in the Z-axis.
The above tolerances are based on the X-Y plane being perpendicular to Y-Z plane.
See Figure 6-2 and Figure 6-3 for the industry-standard connector pin dimensions and references.
Figure 6-2. Connector Pair Blind Mate Misalignment Allowable
Figure 6-3. Device Backplane Connection
2679-771339-A05
Backplane Usage
RELEASED 8/13/13
Drive Handling and Maintenance
45