Western Digital Re EX800M Technical Reference Manual page 40

ATA Command Set
BYTE
364 - 365
366
367
368 - 369
370
371
372
373
374
375 - 510
511
32
VALUE
03h A fatal error or unknown test error occurred while the device
was executing its self-test routine. The device was unable to
complete the self-test routine.
04h The previous self-test completed having a test element that
failed. The test element that failed is not known.
05h The previous self-test completed having a test element that
failed. The electrical element of the test failed.
06h The previous self-test completed having a test element that
failed. The servo (and/or seek) test element of the test failed.
07h The previous self-test completed having a test element that
failed. The read element of the test failed.
08h The previous self-test completed having a test element that
failed. The element damage is suspected to be caused by
handling.
09- Reserved
0Eh
0Fh Self-test routine in progress
XX Total time in seconds to complete offline data collection activity
XX Reserved
07Bh Offline data collection capability. Bits are as follows:
1 = Offline Immediate Command supported
0
1 = Auto Offline enable\disable command supported
1
0 = Offline will suspend on and will resume after host
2
command
1 = Offline read scan implemented
3
1 = DST Short and Extended tests supported
4
1 = DST Conveyance test supported
5
0 - Reserved
6-7
0003h S.M.A.R.T. Capability. Bits are as follows:
1 = The device saves SMART data prior to going into a power
0
saving mode
1 = Device complies with SMART data autosave after an event
1
Reserved
2-15
01h Error logging capability. Bits are as follows:
1 = Error logging supported
0
1 Reserved
XX Reserved
XX Short self-test routine completion time in minutes
XX Extended self-test routine completion time in minutes
XX
Conveyance self-test routine completion time in minutes
XX Reserved
XX Checksum
RELEASED 8/13/13
DESCRIPTION
2679-771339-A05
EX800M