External Antenna - HP EliteDesk 800 G2 Desktop Mini Maintenance And Service Manual

External antenna

The antennas route from the WLAN module to the cable connectors on the rear of the computer.
To install the antennas:
1. Prepare the computer for disassembly
2. Remove the top cover
3. Remove the hard drive
4. If your model is an EliteDesk 800 or MP9, remove the secondary fan
MP9 models only) on page
5. Remove the drive cage
6. Locate the WLAN module on the system board.
7. Disconnect the internal antennae from the WLAN module.
For instructions, see
8. Locate both external antenna positions on the rear panel.
32 Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis
(Preparation for disassembly on page
(Top cover on page 21).
(Hard drive on page 23).
26).
(Drive cage on page 27).
WLAN module on page 30.
20).
(Secondary fan (EliteDesk 800 and