Chapter 6 Maintenance; Preventive Maintenance; Inspection And Cleaning; Cleaning External Plastic Surfaces - Motorola MTP810 EX Basic Service Manual

Motorola two-way radio user manual

Hide thumbs Also See for MTP810 EX:

Table of Contents

MAINTENANCE

Check that the external surfaces of the radio are clean, and that all external

controls and switches are functional. It is not recommended to inspect the interior

electronic circuitry.

The following procedures describe the recommended cleaning agents and

methods to be used when cleaning the external surfaces of the radio. External

surfaces should be cleaned whenever a periodic visual inspection reveals the

presence of smudges, compound, or grime.

The only recommended agent for cleaning external radio surfaces is a 0.5%

solution (one teaspoon of detergent per gallon of water) of mild dishwashing

detergent in water. Apply sparingly with a stiff, non-metallic, short-bristled brush

to work all loose dirt away from the radio. Use a soft, absorbent, lintless cloth or

tissue to remove the solution and dry the radio. Make sure that no water remains

entrapped near the connectors, cracks, or crevices.

NOTE:

Internal surfaces should be cleaned only when the radio is disassembled

for service or repair, and only can be done by Motorola's Regional Radio

Service Centers or Authorized Motorola Service Centers.

CHAPTER 6

MAINTENANCE

6 - 1

Table of Contents