Daikin FTX50GV1B Service Manual page 38

Main Functions
End of Function
The function ends when the HOME LEAVE button is pressed again during HOME LEAVE
operation or when the POWERFUL button is pressed.
HOME LEAVE operation
set temp.
HOME LEAVE operation
set temp.
Setting Temperature and Airflow Rate
When using HOME LEAVE operation for the first time, set your preferred temperature and
airflow rate for HOME LEAVE operation.
Cooling
Heating
1. Press the HOME LEAVE button.
2. Adjust the temperature with the
3. Adjust the airflow rate with the FAN button.
HOME LEAVE operation will run with these settings the next time you start HOME LEAVE
operation. To change the recorded information, repeat steps 1 – 3.
Note: 1. The set temperature and airflow rate are recorded in the remote controller. When the remote
2. The operation mode cannot be changed while HOME LEAVE operation is being used.
27
<Cooling>
Set temp.
Normal operation
<Heating>
Set temp.
Normal operation
Initial setting
Temperature
25°C
25°C
Make sure is displayed on the remote controller.
controller is reset due to battery replacement, the temperature and airflow rate for HOME
LEAVE operation needs to be set again.
HOME LEAVE operation
Start
HOME LEAVE operation
Start
Airflow rate Temperature
18 ~ 32°C
10 ~ 30°C
or button.
SiBE041029EC
Normal operation
Stop
Normal operation
Time
Stop
Selectable range
Airflow rate
5 steps, ,
5 steps, ,
Function and Control
Time
(R11660)
(R22032)