Download Print this page
Varimixer W80 Spare Part And Operation Manual

Varimixer W80 Spare Part And Operation Manual

Hide thumbs Also See for W80:

Advertisement

FOOD MIXER
SPARE PART AND OPERATION MANUAL
Model W80, W100, W150N
Form 109 (02/08)
1993 to Present

Advertisement

loading

Summary of Contents for Varimixer W80

  • Page 1 FOOD MIXER SPARE PART AND OPERATION MANUAL Model W80, W100, W150N Form 109 (02/08) 1993 to Present...
  • Page 2: Read Before Operating

    -READ BEFORE OPERATING- Caution Varimixer recommends that mixer operators be at least 18 years of age and be thoroughly trained on the use of the mixer. Varimixer recommends that the following precautions be adopted to help make the mixer operation safer and more efficient.
  • Page 3: Limited Warranty

    LIMITATIONS OF LIABILITY In the event of warranty claim or otherwise, the sole obligation of Varimixer shall be the repair and/or replacement at the option of Varimixer, of the appliance or component or part thereof Such repair or replacement shall be the expense of Varimixer except that travel over 100 miles or two hours, overtime, and holiday charges shall be,, the expense of the purchaser.
  • Page 4 Read this page entirely BEFORE beginning installation. VARIMIXER INSTALLATION INSTRUCTIONS UNDER NO CIRCUMSTANCES ARE THE SPEED LEVER, BOWL LIFT LEVER, OR THE BOWL ARMS TO BE USED TO MOVE THE MIXER INTO PLACE. DAMAGE WILL RESULT TO THE UNIT. IT IS RECOMMENDED THAT THE TOP LID BE REMOVED BEFORE MOVING THE UNIT.
  • Page 5: Operation Of The Mixer

    OPERATION OF THE MIXER: Open the bowl screen and place the bowl in the bowl arms. Note: The bowl arms must be in lowest position and the bowl must be pushed all the way into the bowl arms. (Fig.3). Place the mixing tool in the bayonet shaft. The pin on the tool must be turned into the bayonet hole (fig.2).
  • Page 6 Correct use of tools: Maintenance and Lubrication: The variable speed pulleys must be lubricated regularly, i.e. a lubrication interval of approx. 60 hours of operation. Whips should never be struck against hard objects, this will Lubrication of variable speed pulleys: decrease the life of the tool.
  • Page 9 81-174...
  • Page 10 Microswitches DESCRIPTION PART NUMBER W100 1. Bowl Lift Micro Bracket 30-250 2. Manual Lift Microswitch 81-173 3. Mounting Screw STA 5270 STA 5270 4. PB Lift Microswitch Bracket 81-174 81-174 5. Screws STA 5270 STA 5270 6. Replace with retrofit kit 81-174 81-174...
  • Page 12 11.41 Inches Long 80-83 13 Inches Long 6370 81-600M...
  • Page 13 81-68...
  • Page 16 100-22.9P 100-22.9P 60-141...
  • Page 18 60-41 100N-41...
  • Page 22 225/100F 225/100R 56P30-15...

This manual is also suitable for:

W150nW100