Table of Contents
Advertisement
A P P E N D I X B
Connecting to PC...PC on?
No.
Yes.
s i m p l e f i is looking for SimpleServe. s i m p l e f i did not successful-
ly ping the PC running SimpleServe. Is your PC turned on? If
not, turn on your PC. If your PC is turned on, is your wireless
adapter plugged into the PC? Check the IP address of your
wireless adapter. For help on IP addresses, see Appendix D,
Configuring IP Address Information. Try rediscovering s i m p l e f i.
For help on rediscovering s i m p l e f i, see troubleshooting tip
(Auto-discovery is not detecting simplefi) in Appendix C,
Troubleshooting.
Turn on your PC.
Then press PLAY button.
s i m p l e f i displays this message to remind you to turn on your
PC. Turn on your PC, then press the
SimpleServe running on PC?
No.
Yes.
s i m p l e f i displays this message if you press the
when the display shows "Connecting to PC...Press
for help." This message is a reminder to launch SimpleServe on
your PC. If SimpleServe is running on your PC, use the naviga-
tion buttons on your remote control to select Yes, then press the
Select
button. Otherwise, select
button.
APPENDIX B, FAQ
FAQ
PLAY
button to continue.
PLAY
button
PLAY
No
and press the
Select
button
60
Advertisement
Table of Contents
