Memory Recall; Memory Offset Tuning; Deleting Memories - Yaesu CT-39A Operating Manual

M
EMORY
R
EGULAR

Memory Recall

1. While operating in the VFO mode, press the [ V/M ] key momentarily to enter the Memory
mode.
2. Rotate the DIAL knob to select the desired channel.
3. To return to the VFO mode, press the [ V/M ] key momentarily again.
When the radio is already set to the Memory mode, an easy way to recall memories
is to enter the microphone's key in the memory channel number. For example, to
recall memory channel #4, press [ 0 ]

Memory Offset Tuning

Once you have recalled a particular memory channel, you may easily tune off that channel,
as though you were in the "VFO" mode.
1. With the FT-8800R in the "MR" (Memory Recall) mode, select the desired memory
channel.
2. Now press and hold in the [ SCN ] key for 1/2 second; the "
display.
3. Rotate the DIAL knob, as desired, to tune to a new frequency. The synthesizer steps
selected for VFO operation on the current band will be the steps used during Memory
Tuning.
4. Press and hold in the [ V/M ] key for 1/2 second during Memory Tuning, the data will now
have been copied to VFO, although the original memory contents will remain intact on
the previously-stored channel.
5. If you wish to return to the original memory frequency, press the [ V/M ] key momen-
tarily. The " " icon will disappear.

Deleting Memories

With 1052 memories available (except memory channel "1"), there frequently are situations
where you may desire to delete certain memorized frequencies. The procedure for deleting
a channel is quite simple:
1. Press the [ V/M ] key, if needed, to enter the Memory mode.
2. Press and hold in the [ SET ] key for 1/2 second, then rotate the "Main" band DIAL knob
to select the memory channel to be deleted. Note that memory channel #1 may not be
deleted.
3. Press the "Main" band [ SCN ] key momentarily. The display will revert to memory chan-
nel #1. If you rotate the "Main" band DIAL knob to the location you just "Masked," you
will observe that it is now invisible.
Note: Once deleted, the channel data cannot be recovered.
34
O
PERATION
M
EMORY
C O
HANNEL
[ 0 ] [ 4 ] .
FT-8800R Operating Manual
PERATION
" icon will appear on the