Wpa-Psk; Figure 14 Station Mode: Security Settings: Wpa-Psk - ZyXEL Communications ZyAIR G-220 User Manual

ZyAIR G-220 User's Guide
Table 5 Station Mode: Security Settings: WEP (continued)
LABEL
Key x (where x is a
number between 1
and 4)
Save

3.3.2.2 WPA-PSK

Figure 14 Station Mode: Security Settings: WPA-PSK

39
DESCRIPTION
Select this option if you want to manually enter the WEP keys. Enter the WEP key
in the field provided.
If you select 64 Bits in the WEP field.
Enter either 10 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for
example, 11AA22BB33) for HEX key type.
or
Enter 5 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9"
(for example, MyKey) for ASCII key type.
If you select 128 Bits in the WEP field,
Enter either 26 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for
example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9"
(for example, MyKey12345678) for ASCII key type.
If you select 256 Bits in the WEP field,
Enter either 58 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for
example,
0000111122223333444455556666777788889999AAAABBBBCCCC000011)
for HEX key type
or
Enter 29 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9"
(for example, MyKey111122223333444455556678) for ASCII key type.
Note: The values for the WEP keys must be set up exactly the
same on all wireless devices in the same wireless LAN.
Note: ASCII WEP keys are case sensitive.
Click Save to save the changes back to the ZyAIR and display the Link Info
screen. Otherwise, click the close (
the Site Survey screen.
) button to discard changes and go back to
Chapter 3 Wireless Station Mode Configuration