Pc Configuration - Motorola SABER RVN4002K User Manual

F3 - PC Configuration: Drives, Paths, Ports, etc...
PC Configuration is important in running the SABER Radio Service Software. When F3 is
selected, the screen shown in Figure 6 will come up. Each data field can be selected by
pressing the ENTER key and entering the proper data for that field. "Toggle" selection is made
only on the last entry in which the UP/DOWN arrow keys will toggle between the two data fields
listed.
MOTOROLA Radio Service Software
SABER Model:
Ver. R05.00.00
R07.01.00
Main.Setup.PC
Archive drive:
Archive path:
Serial Port:
F1 F2
HELP
Use the following steps to configure your computer:
1. Enter the Archive Drive, or default disk drive where you plan to keep your archive files.
For example, if you have a hard disk system and want to save archive files on a floppy
disk in drive A:, enter:
A:
for the Archive Path Name. Press ENTER to continue.
For a floppy disk system, you must enter disk drive B: if you have SABER.EXE in drive A
and MOTOROLA.LBR in drive B.
2. Next, you must enter the Archive Path which is the path name of the archive disk where
all archive files will be kept. On the Screen "\Data" is shown but you
directory any name you wish. Remember to create a directory called "Data" if you enter
this directory name for the Archive Path.
16 Software Installation

PC CONFIGURATION

A
RSS\SABER\Data
COM 1
F3 F4 F5
PRINT
Figure 6. PC Configuration
Enter Drive
F6 F7 F8
SAVE
F9 F10
RESET EXIT
DEFAULT
may call this