Motorola SABER RVN4002K User Manual page 19

Hard Disk Installation Procedure
If you are using a hard drive system, use the installation program on Diskette 1 to install the
RSS properly on your hard disk. To run the install program, set the current disk drive to a
floppy drive and insert Diskette 1. At the > prompt, type:
INSTALL <Enter>
and follow the directions given on the screen. The Install program will check for the existence
of the hard disk specified, that sufficient free disk space exists on the hard disk, and if the
subdirectories exist before attempting to create them.
After the installation is complete, move to either the root directory of the hard drive or to the
\RSS\SABER sub-directory and type:
SABER <Enter>
This will start the SABER RSS software.
13
Software Installation