Glass Door Installation; Double Door Installation; Arch Surround (With Safety Screen) Installation - Regency Excalibur P90 Zero Clearance Owners & Installation Manual

GLASS DOOR
INSTALLATION
1. Fit top door bracket over the flange at the top
of the firebox.
2. Secure with 2 screws on the bottom.
Flange
Door
DOUBLE DOOR
INSTALLATION
1. The optional decorative double doors can be
added to the Arch surround by attaching with
4 magnets as shown below.
ARCH SURROUND AND SAFETY SCREEN INSTALLATION
1. Lift Arch Surround /Safety Screen, hook lower tabs on surround into lower slots on bracket within
unit–as shown in diagram below.
Surround attached by
lower tabs only
2. Line up surround so it is parallel with the unit, lift
surround slightly–lower gently until upper tabs
seat into upper slots on the bracket within the
unit.
Regency Excalibur
installation
3. To remove–lift surround straight up, then pull
forward.
Note: There is an access door at the bottom of
the surround that can be opened by flipping
down 90º.
P90-10 Zero Clearance Direct Vent Gas Fireplace
®
|
39
Final install
| 39