Adjusting The Listening Position; Dm+ Advanced; Using Rear Speakers As Subwoofer - Rear Bass Enhancer; Adjusting Setup Items - Set - Sony MEX-BT3950U Operating Instructions Manual

Adjusting the listening position

You can fine-tune the listening position setting.
1
During reception/playback, press the
select button.
2
Rotate the control dial until "ADJ
POSITION" appears, then press it.
3
Rotate the control dial to adjust the
listening position, then press it.
Adjustable range: "+ 3" – "CENTER" –
"– 3."
4
Press (BACK).
The display returns to normal reception/play
mode.

DM+ Advanced

DM+ Advanced improves digitally compressed
sound by restoring high frequencies lost in the
compression process.
1
During playback, press the select
button.
2
Rotate the control dial until "DM+"
appears, then press it.
3
Rotate the control dial to select "ON,"
then press it.
4
Press (BACK).
The display returns to normal play mode.
Tip
The DM+ setting can be memorized for each source.
Using rear speakers as subwoofer
— Rear Bass Enhancer
Rear Bass Enhancer enhances the bass sound by
applying the low pass filter setting (page 30) to
the rear speakers. This function allows the rear
speakers to work as a subwoofer if one is not
connected.
1
During reception/playback, press the
select button.
2
Rotate the control dial until "RB ENH"
appears, then press it.
3
Rotate the control dial to select from
"1," "2" or "3," then press it.
4
Press (BACK).
The display returns to normal reception/play
mode.
Adjusting setup items — SET
1
Press and hold the select button.
The setup display appears.
2
Rotate the control dial until the
desired item appears, then press it.
3
Rotate the control dial to select the
setting, then press it.*
The setting is complete.
4
Press (BACK).
The display returns to normal reception/play
mode.
* For CLOCK-ADJ, TUNER-STP and BTM settings,
step 4 is not necessary.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
CLOCK-ADJ (Clock Adjust) (page 7)
TUNER-STP* 1 (Tuner Step) (page 6)
CT (Clock Time)
Activates the CT function: "ON," "OFF"
(page 15, 16).
BEEP
Activates the beep sound: "ON," "OFF."
AUX-A* 1 (AUX Audio)
Activates the AUX source display: "ON,"
"OFF" (page 30).
AUTO OFF
Shuts off automatically after a desired time
when the unit is turned off: "NO," "30S
(Seconds)," "30M (Minutes)," "60M (Minutes)."
BLK OUT (Black Out)
Turns off the illumination automatically for any
source (e.g., during radio reception/CD
playback, etc.) if no operation is performed for 5
seconds: "ON," "OFF."
To bring the light back on, press any button on
the unit. (When activated, remote operation is
unavailable.)
DEMO (Demonstration)
Activates the demonstration: "ON," "OFF."
DIMMER
Changes the display brightness: "ON," "OFF."
ILLUM (Illumination)
Changes the illumination color: "1," "2."
AUTO SCR (Auto Scroll)
Scrolls long items automatically: "ON," "OFF."
continue to next page t
29