Installation; Before You Install - AT&T 952 User Manual

Before You Install

NOTE: To use this product as a two-line phone,
you must have a two-line modular jack or two
separate one-line modular jacks. To use both lines
of a two-line telephone, your local telephone
company must provide two telephone numbers.
I N S T A L L A T I O N
Figure 1
Batteries
Before using the telephone, you should install four
AA batteries (not included). If you are connecting
only Line 1 or only Line 2, use two batteries, as
indicated on the bottom of the phone. If you are
connecting both lines, use four batteries.
You can use the phone without batteries to dial and
receive calls using the handset, but it requires batteries
to power the Line Status lights, the headset, and the
Auto Redial feature.
1 Turn the telephone upside down (Figure 1).
2 Remove the base by pressing the tabs located
on the top of the base.
3 Press down on the tab located between the
arrows on battery cover (Figure 2). Remove
the battery cover and insert new AA
batteries, not included (Figure 3).
4 Replace the battery cover.
CAUTION: Always unplug the line cord before
installing new AA batteries.
Figure 2
Figure 3
2