Appendix; Function Of Display For Firmware Version - FujiFilm FinePix S5100 Service Manual

7. Appendix

7. Appendix
7-1.

Function of display for Firmware Version

The function to display the version is installed in FinePix
S5100.
The version the camera equipped with of the firmware can be
displayed only by operating the main body of the camera.
[Procedure]
1. The camera is made a play mode.
2. The power supply switch is turned on while pressing
the shutter button.
3. The "SETUP" display is selected, and changes to a
DATE/TIME set mode.
4. The DATE/TIME setting is matched as follows
(Fig. 7-1).
• 2040 . 2. 29
• 11 : 59 PM
5. After the date is set, keeps pressing the shutter button
for three seconds or more.
6. The version of the farmware is displayed in the upper
right of LCD only while the shutter button is being done
(Fig. 7-2).
Example of display: 1.28
* It is shown that the version of the farm-ware is 1.28.
94
FinePix S5100/S5500 Service Manual
<Fig. 7-1>
<Fig. 7-2>
Version
1.28