FujiFilm FinePix S5100 Service Manual page 65

FinePix S5100/S5500 Service Manual
<Step 2>
Run the adjustment in accordance with the instructions on the screen.
Battery Voltage Adjustment
<Preparations>
1. Check that the Power Cable Jig and the camera are connected.
*If not, return to the Jig Mode Setup screen,
and connect the Power Cable Jig and the camera.
2. Supply power (5.0V) to the camera from the
[Power Cable Jig].
When preparations are complete, press the [Enter] key on the PC.
---> Lens is extended when the [Enter] key is pressed.
—> The [4.34V Input] screen appears.
<Step 3>
Battery Voltage Adjustment
(1) Supply 4.34V (+0.02V/-0.00V).
When preparations are complete, press the [Enter] key.
—> The [3.94V Input] screen appears.
4. Adjustment
<Fig. 4-13-1>
<Fig. 4-13-2>
65