Table of Contents
Advertisement
●
Connections require that a memory card with saved images be in
the camera.
●
Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [
choose the device and then pressing the [
] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
●
If you prefer not to display recent target devices, choose MENU
( = 29) > [
] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
●
To be able to connect without entering the password in step 4
and to make it so that [Password] does not display on the SSID
display screen (step 3), choose MENU ( = 29) > [
[Wireless settings] > [Wi-Fi Settings] > [Password] > [Off].
●
To use another access point, follow steps 3 – 4 in "Using Another
Access Point" ( = 118).
Sending Images to Another Camera
Connect two cameras via Wi-Fi and send images between them as follows.
●
Only Canon-brand cameras equipped with a Wi-Fi function can
be connected to wirelessly. You cannot connect to a Canon-brand
][
] buttons to
camera that does not have a Wi-Fi function, even if it supports
FlashAir/Eye-Fi cards.
] tab >
1
Access the Wi-Fi menu.
●
Press the [
] button.
2
Choose [
].
●
Press the [ ][ ][ ][ ] buttons or turn
the [ ] dial to choose [
], and then
press the [ ] button.
3
Choose [Add a Device].
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose [Add a Device], and then
press the [ ] button.
●
Follow steps 1 – 3 on the target camera
too.
●
Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
129
Advertisement
Table of Contents
