Preventing the Red-Eye Reduction Lamp from
Lighting Up
A red-eye reduction lamp lights up to reduce red-eye when the flash is
used in low-light shots. You can deactivate the lamp.
1
Access the [Flash Settings] screen.
●
Press the [
Settings] on the [
the [ ] button ( = 29).
2
Configure the setting.
●
Choose [Off] ( = 29).
●
To restore the original setting, repeat this
process but choose [On].
Changing the Image Display Style after Shots
Still Images
Movies
You can change how long images are displayed and what information is
displayed immediately after shooting.
] button, choose [Flash
] tab, and then press
Quick
2 sec.,
4 sec.,
8 sec.
Hold
Off
Changing the Image Display Period after Shots
1
Access the [Review image after
shooting] screen.
●
Press the [
[Review image after shooting] on the
[
] tab, and then press the [ ] button
( = 29).
2
Configure the setting.
●
Choose [Display Time], press the [ ][ ]
buttons to choose the desired option.
●
To restore the original setting, repeat this
process but choose [Quick].
Displays images only until you can shoot again.
Displays images for the specified time. Even while the
shot is displayed, you can take another shot by pressing
the shutter button halfway again.
Displays images until you press the shutter button
halfway.
No image display after shots.
Before Use
Basic Guide
Still Images
Movies
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
] button, choose
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
54