Table of Contents
Advertisement
9
Send images.
●
Press the [ ][ ][ ][ ] buttons or turn
the [ ] dial to choose [Select and send],
and then press the [ ] button.
●
Press the [ ][ ] buttons or turn the [ ]
dial and select [Select], and then press
the [ ] button.
●
Press the [ ][ ][ ][ ] buttons or turn
the [ ] dial to choose an image to
send, press the [ ] button to mark it
as selected ([
]), and then press the
[
] button.
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose [OK], and then press the
[ ] button.
●
Press the [ ][ ][ ][ ] buttons or turn
the [ ] dial to choose [Send], and then
press the [ ] button.
●
[Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
●
To end the connection, press the
[
] button, choose [OK] on the
confirmation screen (either press the
[ ][ ] buttons or turn the [ ] dial), and
then press the [ ] button. You can
also use the smartphone to end the
connection.
●
To add multiple smartphones, repeat the
above procedure starting from step 1.
●
All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 8. To keep camera
images private, so that they cannot be viewed from the
smartphone, choose [No] in step 8.
●
Once you have registered a smartphone, you can change privacy
settings for it on the camera ( = 137).
●
Connections require that a memory card be in the camera.
●
Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [
choose the device and then pressing the [
] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
●
If you prefer not to display recent target devices, choose MENU
( = 29) > [
] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
●
To be able to connect without entering the password in step 5
and to make it so that [Password] does not display on the SSID
display screen (step 4), choose MENU ( = 29) > [
[Wireless settings] > [Wi-Fi Settings] > [Password] > [Off].
●
You can also send multiple images at once and change the image
size before sending ( = 131).
●
You can send the current image by choosing [Send this image] on
the screen in step 9.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
][
] buttons to
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
] tab >
Setting Menu
Accessories
Appendix
Index
117
Advertisement
Table of Contents
