Sending Images To Another Camera - Canon PowerShot SX540 HS User Manual

● Connections require that a memory card with saved images be in
the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [
to choose the device and then pressing the [
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
● If you prefer not to display recent target devices, choose MENU
( = 29) > [
] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
● To be able to connect without entering the password in step 4
and to make it so that [Password] does not display on the SSID
display screen (step 3), choose MENU ( = 29) > [
[Wireless settings] > [Wi-Fi Settings] > [Password] > [Off].
● To use another access point, follow steps 3 – 4 in "Using Another
Access Point" ( = 117).

Sending Images to Another Camera

Connect two cameras via Wi-Fi and send images between them as follows.
][ ]] buttons
● Only Canon-brand cameras equipped with a Wi-Fi function can be
] button. To add a
connected to wirelessly. You cannot connect to a Canon-brand camera
that does not have a Wi-Fi function, even if it supports FlashAir/Eye-Fi
cards.
] tab >
1
Access the Wi-Fi menu.
● Press the [ ] button.
2
Choose [ ].
● Press the [ ][ ][ ][ ] buttons to choose
[ ], and then press the [ ] button.
3
Choose [Add a Device].
● Press the [ ][ ] buttons to choose [Add
a Device], and then press the [ ] button.
● Follow steps 1 – 3 on the target camera
too.
● Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, and M Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
128