Sending Images To Another Camera - Canon PowerShot SX420 IS User Manual

● Connections require that a memory card with saved images be in
the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
● If you prefer not to display recent target devices, choose MENU
( = 25) > [
] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
● To be able to connect without entering the password in step 4
and to make it so that [Password] does not display on the SSID
display screen (step 3), choose MENU ( = 25) > [
[Wireless settings] > [Wi-Fi Settings] > [Password] > [Off].
● To use another access point, follow steps 3 – 4 in "Using Another
Access Point" ( = 84).

Sending Images to Another Camera

Connect two cameras via Wi-Fi and send images between them as follows.
● Only Canon-brand cameras equipped with a Wi-Fi function can
][ ] buttons to
be connected to wirelessly. You cannot connect to a Canon-brand
camera that does not have a Wi-Fi function, even if it supports
FlashAir/Eye-Fi cards.
] tab >
1
Access the Wi-Fi menu.
● Access the Wi-Fi menu as described
in step 2 in "Adding a Smartphone"
( = 82).
2
Choose [ ].
● Press the [ ][ ][ ][ ] buttons to choose
[ ], and then press the [ ] button.
3
Choose [Add a Device].
● Press the [ ][ ] buttons to choose [Add
a Device], and then press the [ ] button.
● Follow steps 1 – 3 on the target camera
too.
● Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
Index
95