Safety Rules - Ariens 915013-1742 EZR Owner's/Operator's Manual

1. DANGER!
TO AVOID SERIOUS INJURY OR DEATH
Read operator's manual.
OL1801
Keep children and others away from unit
while operating.
OL4140
Look down and behind before and while
backing.
OL4100
Never carry children, even if mower is
disengaged.
OL4110
OL4120
Never direct discharge toward other people.
Thrown objects can cause injury.
OL0910
Go up and down slopes, not across. Do not
operate on slopes that exceed 10°.
OL4130
• If machine stops going uphill, stop blade and
back down slowly.
• Avoid sudden turns.
• Keep safety devices (guards, shields, switches,
etc.) in place and working.
• Check interlock system per manual before use.
• Understand location and function of all controls.
• Never allow operation by untrained persons.
2. DANGER ROTATING PARTS
Always keep feet and hands away from
rotating parts.
OL3030
Never direct discharge toward other people.
Thrown objects can cause injury.
OL0910
Keep people away from unit while
operating.
OL4140
Shut off engine, remove key, read manual
before you adjust or repair unit.
OL4010
NO STEP! Always keep feet away from
rotating parts.
OL4420
3. WARNING - KEEP GUARDS IN PLACE
Always stand clear of the discharge area
when operating this unit.
OL4430
Do not operate mower unless guards are in
operating position or bagger is attached.
OL3320
4. WARNING - FOR SAFE DECK REMOVAL
Avoid injury from stored energy in lift assist spring.
1
2
1
2
3
5. AVOID HOT SURFACES
HOT SURFACES! DO NOT touch parts
which are hot from operation. Always allow
parts to cool.
OS0732

SAFETY RULES

Operation
Read, understand, and follow all instructions in the
manual and on the machine before starting:
• How to operate all controls
GB - 7
Lift lever can spring up
quickly if released while
mower deck is removed.
Do not unlock attachment
lift lever when mower deck
is removed.
OE0770
Before removing the
mower deck, ❶ lower the
5
attachment lift lever to
4
position 1, then ❷ latch
3
2
and lock the lock pin.
1
OE0780
To properly latch and lock
the lock pin.
❶ Pull the pin out of the
latched unlocked position.
❷ Rotate the lock pin
downward 90°.
OE0790
❸ Push lock pin in to
locked position.