Ariens 915013-1742 EZR Owner's/Operator's Manual page 9

Avoid slippery surfaces. Always be sure of your footing.
Keep all nonskid surfaces clean. Replace safety treads
if worn, damaged, or missing.
Always keep hands and feet away from rotating parts.
Do not step on mower deck when mounting, operating
or dismounting tractor.
NEVER operate the machine after or during the use of
medication, alcohol or drugs. Safe operation requires
your complete and unimpaired attention at all times.
NEVER allow anyone to operate this unit when their
alertness or coordination is impaired.
Do not touch parts which are hot from operation.
ALWAYS allow parts to cool.
Always keep hands away from all pinch points.
NEVER place your hands or any part of your body or
clothing inside or near any moving part while unit is
running.
DO NOT wear loose clothing or jewelry. Tie back hair
that may get caught in rotating parts.
Always stand clear of discharge area.
Keep people away from unit while operating.
Shut off engine, remove key, read manual before you
unplug, adjust or repair unit.
DO NOT run engine in an enclosed area. Always
provide good ventilation. Fumes from engine exhaust
can cause injury or death.
Keep children out of the mowing area and under the
watchful care of another responsible adult.
Be alert and turn off machine if children enter the area.
Before and when backing up, look behind and down for
small children.
Never carry children, even if mower is disengaged.
They may fall off and be seriously injured or interfere
with safe machine operation.
Never allow children to operate or play on or near the
unit.
Always keep batteries out of reach of children.
HYDRAYLIC FLUID WILL CAUSE SEVERE BURNS.
Fluid in the hydraulic system can penetrate the skin
and cause death or serious injury.
Transport
NEVER push or pull (tow) unit with another vehicle.
Transmission damage will occur.
Use extra care when loading or unloading the machine
into a trailer or truck.
Secure unit chassis to transport vehicle. Never secure
by linkages which could become damaged.
DO NOT transport machine while engine is running.
DO NOT transport with attachment in the lowered
(operating) position.
Towing
Tow only with a machine that has a hitch designed for
towing. Do not attach towed equipment except at the
hitch point.
Follow the manufacturer's recommendations for weight
limits for towed equipment and towing on slopes.
Never allow children or others in or on towed
equipment.
On slopes, the weight of the towed equipment may
cause loss of traction and loss of control.
Travel slowly and allow extra distance to stop.
Service
Before making any inspections, repairs, adjustments,
etc. disengage PTO, stop unit and engine, remove key,
and allow moving parts to stop.
ALWAYS block wheels and know all jack stands are
strong and secure and will hold weight of unit during
maintenance.
Use extra care in handling gasoline and other fuels.
They are flammable and vapors are explosive.
• Use only an approved container.
• Never remove gas cap or add fuel with the engine
running. Allow engine to cool before refueling. Do
not smoke.
• Never refuel the machine indoors.
• Never store the machine or fuel container inside a
building where there is an open flame, such as a
water heater.
Never fill containers inside a vehicle or on a tuck or
trailer bed with a plastic liner. Always place containers
on the ground away from your vehicle before filling.
When practical, remove gas-powered equipment from
the truck or trailer and refuel it on the ground. If this is
not possible, then refuel such equipment on a trailer
with a portable container, rather than from a gasoline
dispenser nozzle.
Keep the nozzle in contact with the rim of the fuel tank
or container opening at all times until fueling is
complete. Do not use a nozzle lock-open device.
If fuel is spilled on clothing, change clothing
immediately.
Keep nuts and bolts tight, especially blade attachment
bolts, and keep equipment in good condition.
Never modify, alter or permit anyone to modify or alter
the unit or its components.
Never tamper with safety devices. Check their proper
operation regularly. (See Operator Presence System in
Operation )
Keep machine free of grass, leaves, or other debris.
Clean up oil or fuel spills.
Allow machine to cool before storing.
GB - 9