Stihl Ms 201 Instruction Manual page 34

English
Replacing a torn starter rope
Version with ElastoStart
Pry the cap out of the starter grip
N
Remove remaining rope from the
N
rotor and starter grip
Thread the new starter rope through
N
the starter handle and secure it by
making a simple overhand knot
Pull the knot into the starter grip
N
Refit the cap in the grip
N
32
Version with ErgoStart
Remove remaining rope from the
N
rotor and starter grip
Thread the new starter rope through
N
the starter grip and secure it by
making a knot
Installing the rope rotor
Version with ElastoStart
1
Thread the rope from above through
N
the rope guide bush (1) and rope
rotor (2) and secure with a simple
overhand knot
Coat the bearing bore in the rope
N
rotor with non-resinous oil
Slip the rope rotor onto the starter
N
post (3) – turn it back and forth a
little until the anchor loop of the
rewind spring engages
MS 201, MS 201 C
2