Advanced Ptz Controls; Presets - Lorex NR800 Series Instruction Manual

21
Connecting a PTZ Camera (NR800 Series)

21.2 Advanced PTZ Controls

Advanced PTZ controls can be used to save camera positions and cycle through various
positions, and automate camera actions.
To open advanced PTZ controls:
• Click the arrow in the PTZ control window to open advanced controls.
Advanced PTZ controls overview:
1. No.: Select the number of the action you want to perform.
2. Not supported.
3. PTZ camera menu: Click to open the camera's OSD menu. This may not be sup-
ported on all camera models.
4. Preset: Click to call the selected preset.
5. Autopan: Click to start autopan. During autopan, the camera will continuously pan
360°.
6. Tour: Click to run the selected tour.
7. Flip: Click to flip the camera 180°.
8. Reset: Click to move the camera to the home position.
9. Pattern: Click to run the selected pattern.
10. Auto scan: Click to run the selected autoscan.
11. Aux: Click to open the aux menu, where you can set up Presets, Tours, Patterns, and
Auto Scans.

21.2.1 Presets

Presets will save a camera position for quick retrieval.
To add presets:
1. Click to open the aux menu.
#LX400021; r. 4.0/30344/30494; en-US
153