Paging All Phones; Answering An Allpage; Making An Intercom Conference Call; Room Monitor - AT&T 874 User Manual

Paging All Phones

1
Press and release
2
Speak toward the telephone.
3 Press and release K to disconnect.

Answering an ALLPAGE

1
Press
2
Use the already activated speakerphone, or lift the handset.
3
To end, press and release K or hang up.

Making an Intercom Conference Call

1
Make or answer a call.
2
Press and release I and enter the station number.
3
After the third party answers, press and release C.
4
To end an intercom conference call, hang up.
NOTE: You cannot put an intercom conference call on hold.

Room Monitor

You can activate the speaker of another phone to monitor sounds in that
room.
1
Press and release p.
2
Enter the station number of the telephone to be monitored.
3
Press and release M if you don't want sounds on your end to be
heard.
4
To end monitoring, press and release K.

Checking Your Station Number

1
Press and release I.
2
Use the dial pad to enter a station number (11 to 22).
3 Press K to hang up.
4
Repeat Steps 1–3 until the intercom light goes off. The last number
entered is your station number.
NOTE: If the intercom light stays on even after you enter numbers 11
through 22, your phone does not have a station number. See "Assign
Intercom Number" in the TELEPHONE FEATURE SETUP section for
assigning intercom station numbers.
INTERCOM OPERATION
or p, *.
or p.
23