Telephone Feature Setup; Assign Intercom Number; Set The Clock; Set Dial Mode - AT&T 874 User Manual

TELEPHONE FEATURE SETUP

Assign Intercom Number

1
Do not lift the handset.
2
Press G, *, #.
3
Enter two digits (11–22).
4
Press I. You will hear a confirmation ring.
NOTE: If you duplicate an intercom number, you'll hear a warning tone.
Repeat Steps 1–4 and assign a different number.
5
Pry up the intercom number card cover, write the intercom number
on the card, and replace the cover.

Set the Clock.

NOTE: You'll hear a confirmation tone when you enter numbers correctly.
If you make a mistake, press and release S to start over.
1
Press and release S. The screen displays zeros.
2
Press and release * for AM or # for PM
— OR —
Go on to Step 3 if you want the clock set to military/European time.
3
Enter two digits to set the month (for example, press 0 3 for
March).
4 Enter two digits to set the date (for example, press 0 9 for the
ninth).
5
Enter one digit for the day of the week (for example, press 1 for
Sunday or 5 for Thursday).
6
Enter two digits for the hour (for example, press 0 1 for one
o'clock, or 1 1 for eleven o'clock).
7 Enter two digits for the minutes (for example, press 3 1 for :31).

Set Dial Mode

1 Press G, *, #, *.
2 Press and release 2 for tone dialing
— OR —
Press and release 3 for pulse dialing.
3 Press and release M. You'll hear a confirmation ring if you've
entered information correctly.
10