Motorola SURFboard SBV5222 User Manual page 19

Introduction
5
Check that the lights on the front of the digital voice modem cycle through this sequence:
•
Power flashes during the self-test and changes to solid green when the self-test is successfully complete.
•
Receive flashes while scanning for the receive (downstream) channel and changes to solid green when it
is connected.
•
Send flashes while scanning for the send (upstream) channel and changes to solid green when it is
connected.
•
Online flashes while the digital voice modem downloads configuration data and changes to solid green
when the download is complete.
6
Connect your computer to the digital voice modem using USB or Ethernet:
USB: Be sure the SURFboard Voice Modem CD-ROM is inserted in your CD-ROM drive. Perform the
appropriate procedure for
USB port on the digital voice modem. Connect the other end to the USB port on your PC.
Ethernet: Connect the provided straight-through Ethernet cable to the Ethernet connector on the digital voice
modem. Connect the other end to the Ethernet port on your computer. Ethernet users do not need to set up USB.
SBV5222 SURFboard® Digital Voice Modem
Installation
digital voice modem
Setting Up a USB Driver
Troubleshooting
Either/or
Computer
for your Windows version. Connect the USB cable to the
Glossary License
11