Table of Contents
Advertisement
Self-Test
To test the lights, ringer,
and dial pad keys on your
voice terminal
Note: Although the Drop/Test button is labeled
[
] , it is also used to initiate a self-test of your
Drop
voice terminal.
While the handset is on-hook, press [
1
Red light next to [
2
Press [
]
Drop
You hear a tone
Red Message light goes on steadily
3
After you hear the tone repeated, press any button on
the voice terminal
The voice terminal emits a key click
As you press [
Mute
[
] , the lights next to these buttons go
Transfer
on steadily
As you press [
Redial
[
] , the lights next to [
Hold
[
] , and [
Conf
Transfer
4
Pick up handset and press each dial pad key
When you pick up the handset, the Message
light flashes
Handset emits tone as each key is pressed
Hang up handset
5
6
Press [
] and then [
Program
return to normal call-handling mode
All lights on voice terminal flash once
Note: If you do not press [
end the self-test, the voice terminal automatically
exits testing mode after 30 seconds.
]
Program
] goes on steadily
Program
] , [
] , [
] , and
Program
Conf
] , [
] , [
] , and
Memory
Drop
] , [
Mute
Program
] flash
] to end test and
Drop
] and [
Program
Drop
[ ]
] ,
] to
15
Advertisement
Table of Contents
