Removing Drivers / Board Image Capture / Quick Image Navigator; Removing Panasonic-Dms - Panasonic UB-5310 Operating Instructions Manual

5
Download the desired software from the
appropriate download web site, then double-
click the downloaded installer.
6
Follow the on-screen instructions when
messages appear.
7
When the setup process is completed, restart
Windows.
• For information about Quick Image Navigator
or Panasonic-DMS, refer to the
corresponding operating instructions, which
can be downloaded from the web site.
• To read the Quick Image Navigator operating
instructions or the Panasonic-DMS operating
instructions, Adobe Reader or Acrobat
Reader must be installed on your computer.
Computer Interfacing
■ Removing Drivers / Board Image
Capture / Quick Image Navigator
If you need to remove the USB driver, printer driver,
TWAIN driver, Board Image Capture and Quick Image
Navigator, perform the following steps.
1
Power on your computer and start Windows.
• Log on as an administrator for Windows
2000, Windows XP, Windows Vista or
Windows 7.
2
In the Control Panel, double-click Add/
Remove Programs (Windows XP: Add or
Remove Programs, Windows Vista /
Windows 7: Uninstall a program).
3
Select the software you want to remove, then
remove it.
• To remove the USB and TWAIN driver, select
Panaboard UB5-7 Driver.
To remove Board Image Capture, select
Panasonic Board Image Capture.
To remove Quick Image Navigator, select
Panasonic Quick Image Navigator.
4
Follows the instructions on the screen.
5
After uninstalling, restart your computer.

■ Removing Panasonic-DMS

If you need to remove Panasonic-DMS, perform the
following steps.
1
Power on your computer and start Windows.
2
Click [Start], move the pointer to Programs–
Panasonic–Panasonic Document
Management System–Uninstall.
3
Click [OK].
4
After uninstalling, restart your computer.
19