Honda CB300FA Owner's Manual page 93

5. Remove the rear axle shaft, side collars
and rear wheel.
.... Support the brake ca liper assembly so
that it doesn't hang from the brake
hose. Do not twist the brake hose.
.... Avoid getting grease, oil, or dirt on
the disc or pad surfaces .
.... Do not push the brake pedal while the
brake caliper is removed.
Installation
1. To insta ll the rear wheel, reverse the
removal procedure.
.... Take care to prevent the brake caliper
from scratching the wheel during
instal lation.
Tire Puncture
~
Removing Wheels
lmim
When installing the brake caliper into position, carefully
fit the brake disc between the pads to avoid scratching
them.
2. Make sure that the lug on the brake
ca liper bracket is positioned in the slot on
the swingarm .
Slot~
11
,e_ I
Lug
Swingarm
•
continued
89