Warning Indicators On Or Flashing; Pgm-Fi Malfunction Indicator Lamp; Abs Indicator - Honda CB300FA Owner's Manual

•
-I
0
c
0-
(I
:::T
0
0
c!.
:J
lO
82
Warning Indicators on or Flashing
PGM-FI (Programmed Fuel
Injection) Malfunction Indicator
Lamp (MIL)
If the indicator comes on while riding, you
may have a serious problem with the PGM-FI
system. Reduce speed and have your
motorcycle inspected by your dealer as soon
as possible.
ABS (Anti-lock Brake System)
Indicator (CB300FA only)
If the indicator operates in one of the
following ways, you may have a seriou s
problem with the brake system. Reduce your
speed and have your motorcycle inspected by
your dealer as soon as possible .
• Indicator comes on or starts flashing while
riding.
• Indicator does not come on when the
ignition switch is in the ON position.
• Indicator does not go off at speeds above
6 mph (10 km/h).
If the ABS indicator stays on, your brakes will
continue to work as a conventional system,
but without the anti-locking function.
The ABS indicator may flash if you turn the
rear wheel whi le your motorcycle is lifted off
the ground. In this case, turn the ignition
switch off and then on aga in . The ABS
indicator w ill go off after your speed reaches
19 mph (30 km/h) .