Cleaning And Lubrication; Recommended Lubricant - Honda CB300FA Owner's Manual

•
s:
OJ
:J
r+
ro
:J
OJ
:J
n
ro
44
Maintenance Fundamentals
tmmD
Use of a new chain with worn sprockets will cause rapid
chain wear .
I
Cleaning and Lubricating
After inspecting the slack, clean the chain and
sprockets wh ile rotating the rear w heel. Use a
dry cloth wi th chain cleaner designed
specifically for 0-ring chains, or neutral
detergent. Use a soft brush if the chain is dirty.
After cleaning, wipe dry and lubricate with a
lubricant designed specifica lly for use on 0-ring
chains.
Recommended lubricant:
Pro Honda HP Chain lube or equ iva lent
Do not use a steam cleaner, a high pressure
cleaner, a wire brush, volatile solvent such as
gasoline and benzene, abrasive cleaner, chain
cleaner or lu bricant NOT designed specifically
for 0-ring cha ins as these can damage the
rubber 0 -ring sea ls.
Avo id getting lubricant on the brakes or tires.
Avoid applying excess chain lubricant to prevent
spray onto your clothes and the motorcycle.