Support Page And Options - Dell DR series Administrator's Manual

NOTE: To change CIFS login credentials, you can use the DR Series system CLI command, authenticate –set –
user . For details, see the
NOTE: Editing your existing login password is different than resetting your login password. Click Edit Password in
the System Configuration page to edit your login password to reflect any value that meets the system password
requirements (for more information, see
to reset your login password to the system default value, which requires you to provide the service tag for your
system. For more information, see
Shutdown
Shutdown—click this option to display the Shutdown System dialog, where you can shut down the DR Series system.
CAUTION: Shutdown powers Off the appliance on which the system software is installed. Once in a powered Off
state, you can power it On at its physical location or using an iDRAC configuration to the system.
Reboot
Reboot—click this option to display the Reboot System dialog, where you can reboot the DR Series system.

Support Page and Options

Click Dashboard → Support to display the Support page. The Support page displays the current support-related
information for your system in the Support Information pane:
NOTE: The exact number of Ethernet listings (MAC and Speed) displayed depend upon the number and type of
Ethernet ports installed in your system. For example, the DR4000 system can support up to four 1–GbE ports or up
to two 10–GbE ports, and the DR4100 system can support up to six 1–GbE ports (four internal 1–GbE ports on the
network daughter card and two 1–GbE ports on a PCI Express expansion card) or two 10–GbE ports. The following
example shows four ports (eth0 through eth3).
• Product Name
• Software Version
• Service Tag
• Last Diagnostic Run
• BIOS Version
• MAC Address
• iDRAC IP Address
• eth0 MAC
• eth0 Speed
• eth1 MAC
• eth1 Speed
• eth2 MAC
• eth2 Speed
• eth3 MAC
• eth3 Speed
In addition, this page provides options for supporting, upgrading, and licensing additional storage for your DR Series
system: Diagnostics, Software Upgrade, and License. For more information, see
Options.
Dell DR Series System Command Line Reference Guide .
Modifying the System
Resetting the Default System
Password. Click Reset Password in the Login page
Password.
Understanding the Support Page
65