Dell DR series Administrator's Manual page 168

System Event Message
Filesystem server crashed multiple times. System is
now entering Maintenance mode.
Insufficient disk space. Filesystem switched to read-
only mode.
Unable to detect filesystem type on the Data Volume.
Unable to detect filesystem type on the Namespace
Volume.
Filesystem scan discovered inconsistencies.
NVRAM does not match data volume.
Storage usage is approaching the DR Series system
capacity.
Replication resync cannot proceed because the
Namespace depth has reached its maximum.
Filesystem has reached the maximum allowable file(s)
and directories limit. New file and directory creation
will be denied until sufficient space exists.
Filesystem is reaching the maximum allowable file(s)
and directories limit. New file and directory creation
will be denied after the limit has been reached.
Replication has encountered an unexpected error.
DataCheck has detected a potential corruption.
Temperature warning detected on NVRAM PCI
controller.
Filesystem Name Space partition has reached its
maximum allowable limit.
Filesystem Name Space partition is reaching its
maximum allowable limit.
168
Description/Meaning or Action
Contact Dell Support for assistance or intervention.
Informational message. No user intervention is required. If
issue persists, contact Dell Support for assistance or
intervention.
Contact Dell Support for assistance or intervention.
Contact Dell Support for assistance or intervention.
Please check report and take the recommended action.
Contact Dell Support for assistance or intervention.
If this is a newly replaced NVRAM device, use the CLI
maintenance --hardware --reinit_nvram command. For more
Dell DR Series System Command Line
information, see the
Reference Guide .
Informational message. No user intervention is required. If
issue persists, contact Dell Support for assistance or
intervention.
Informational message. No user intervention is required. If
issue persists, contact Dell Support for assistance or
intervention.
Please clean up the filesystem. If issue persists, contact Dell
Support for assistance or intervention.
Please clean up the filesystem. If issue persists, contact Dell
Support for assistance or intervention.
Contact Dell Support for assistance or intervention.
Run data consistency checks at the first available opportunity.
If this issue persists, contact Dell Support for assistance or
intervention.
Please check the data center air conditioning, rack
ventilation, and internal cooling fans for any issues. Ensure
that there is proper air flow through the system appliance,
and clean the system cooling vents as needed. If issue
persists, contact Dell Support for assistance or intervention.
Please delete any old, unused file(s) or disable replication(s).
If issue persists, contact Dell Support for assistance or
intervention.
New replication resynch(s) will be stopped. If issue persists,
contact Dell Support for assistance or intervention.