To transfer the current call, do the following:
1.
Press
The call is placed on hold.
You hear a dial tone.
2.
Dial the number to which the call is to be transferred.
You hear a ringback tone.
3.
Remain on the line and announce the call; if there is no answer or the
line is busy, return to the held call by pressing the held call appearance
button.
4.
Press
The call is transferred.
5.
Go on-hook.
Volume Control
The volume control on your voice terminal can be adjusted to eight different vol-
ume levels for the ringer, the speaker, and the handset. This is done by press-
ing the
Volume
using the handset. Pressing the right side of the
volume, and pressing the left side of the
As you adjust the volume, the display shows the volume setting for the device
you are adjusting:
a=
38
Issue 1
March 1996
.
Transfer
again.
Transfer
button when a call is ringing, when using the speaker, or when
RINGER
L>>>>>>
0
button increases the
Volume
button decreases the volume.
Volume
H