AT&T 8434 Quick Reference page 19

Voice terminal

Hide thumbs Also See for 8434:

Table of Contents

The following special conditions apply when you use the keypad digits with the

Integrated Directory feature:

Use

for a space and a comma.

Use

for the letter Q.

Use

for the letter Z.

Display, Softkeys, and Control Buttons

Entering Softkey Mode and Viewing the Three

Feature Option Screens

There are three separate feature option screens. Each of these screens allows

you to select from five different features for a total of 15 features. There are

more than 15 features available from the server; ask your system administrator

to give you the features you need most.

You can enter the Softkey Mode by pressing the display option button labeled

. The following is an example of a feature option screen:

CFrwd

The top line of each feature option screen shows you the status of each of the

features. An arrow appears above the feature name or abbreviation if the

feature is active. If there is no arrow above the feature, the feature is not active.

In the above example, the Automatic Callback feature is active.

The second line on each feature option screen shows the features you can

access. To use any of these features, you must press the softkey below the

feature name or abbreviation. For example, on the feature option screen shown

previously, you can leave a message for another extension to call you back by

pressing the softkey below LWC (the Leave Word Calling feature). If you want to

LWC

CnLWC

TmDay

PCall

Issue 1

March 1996

Table of Contents