Ram Module - Panasonic CF-M34 series Reference Manual

RAM Module

RAM Module
2
2
Hooks
Use a RAM module meeting the RAM module specifications below. If a module is used
that does not meet the specifications, there are cases in which data may become unus-
able or the computer may not operate properly.
RAM module specifications
144 pins, SO-DIMM, 3.3 V, SDRAM, PC100 Compliant
Only a RAM card designed for PC100 can be added
(Max. 128 MB).
CAUTION
RAM modules are extremely sensitive to static electricity. There are cases where
static electricity generated by the human body has adversely affected such mod-
ules. In addition, it is easy to damage the RAM modules or internal components
of the computer. Therefore, when installing or removing a RAM module, handle
the module with extreme care.
Installing/Removing the RAM Module
1
Power off your computer
Do not shut down using the suspend or hibernation mode.
2
Remove the battery pack
3
Remove the cover
Remove the ten screws with a screwdriver, and remove the bottom
cover as shown in the illustration.
4
Installing the RAM module
Slide in the module at an angle.
2
Snap the module into place by pushing down on it.
Removing the RAM module
Open the left and right hooks.
2
Gently remove the RAM module from the slot.
5
Put the cover back into place
( "Starting Up/Shutting Down")
( page 22)
25