Panasonic CF-M34 series Reference Manual page 43

Creating Backup Disks
Make a copy of the CD-ROM driver
When using a CD-ROM drive other than the Panasonic KXL-RW10A CD-ROM drive
Copy the necessary drivers, from the floppy disk included with your CD-ROM drive, to
the FIRSTAID FD with the method below. It will be necessary to edit the CONFIG.SYS
file and AUTOEXEC.BAT file on the FIRSTAID FD. When editing the AUTOEXEC.BAT
file.
Some CD-ROM drives require card managers (card and socket service). See the manual
included with your CD-ROM drive for further details.
1
Start Windows and insert the FIRSTAID FD
2
Select [Start]-[Programs]-[Accessories]-[NotePad] and open
[a:\config.sys]
3
Rewrite the following line and save
Delete the following four lines.
;KXL-RW10A DRIVER
DEVICE=A:\TOOLS\KMASMGRA.SYS
DEVICE=A:\TOOLS\KMASASPA.SYS
DEVICE=A:\TOOLS\KMASCDA.SYS /D:YOUR_CD
Add the driver of your CD-ROM drive.
Device=A:\DRIVER1.SYS /D:YOUR_CD
Rewrite this driver for the driver of your CD-ROM drive. The
driver for the PC Card will also be necessary. Refer to the op-
eration manual that accompanies the CD-ROM drive.
4
Copy the CD-ROM driver file (i.e., the driver file rewritten in step
3) of the CD-ROM drive below [a:\] of the FIRSTAID FD
5
Set the floppy disk to the write-protect state
43