Ram Module - Panasonic CF-73 Series Reference Manual

RAM Module

Inserting/Removing RAM Module
B
A
1
2
1
1
2
Inserting additional RAM modules and increasing memory will enable you to run Windows
and application software more easily, and to increase overall operating efficiency.
Use a RAM module meeting the RAM module specifications below. If a module is used
that does not meet the specifications, there are cases in which data may become unusable
or the computer may not operate properly..
RAM module specifications
200 pins, SO-DIMM, DDR-SDRAM, PC2100 Compliant
Only a RAM module designed for PC2100 can be added.
CAUTION
●
RAM modules are extremely sensitive to static electricity. There are cases where
static electricity generated by the human body has adversely affected such mod-
ules. When inserting or removing a RAM module, do not touch the terminals or
internal components, insert objects other than the module, or allow foreign particles
to enter. Doing so has been known to cause damage, fire or electric shock.
CAUTION
●
If the RAM module is difficult to insert or difficult to press down, do not force it.
Check once more to ensure that the module is positioned correctly.
1
Power off your computer.
Do not shut down using the standby or hibernation function.
Disconnect the AC adaptor.
2
Turn the computer over and remove the battery pack.
3
Remove the cover (A) after removing the screw (B) holding it in
place.
4
●
Inserting the RAM module
1
Slide in the module at an angle.
2
Snap the module into place by pushing down on it.
●
Removing the RAM module
1
Gently open the left and right hooks.
2
Gently remove the RAM module from the slot.
5
Put the cover back in place.
1
Insert the cover diagonally, then fit it in place.
2
Fasten the screw.
NOTE
●
Whether the RAM module is properly recognized or not can be confirmed in [Infor-
mation] menu of the Setup Utility (
power off the computer and insert it again.
( ⇒
"Starting Up/Shutting Down")
⇒ page
53). If the RAM module is not recognized,
36
( ⇒ page 26)