Editing Still Images - Canon PowerShot SX420 IS User Manual

2
Choose an image.
● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
[ ] is displayed.
● To untag the image, press the [ ] button
again. [ ] is no longer displayed.
● Repeat this process to choose additional
images.
3
Configure the setting.
● Press the [ ] button. A confirmation
message is displayed.
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
● Images will not be tagged as favorites if you switch to Shooting
mode or turn the camera off before finishing the setup process in
step 3.

Editing Still Images

Image editing ( = 73 – = 76) is only available when the
●
memory card has sufficient free space.
Resizing Images
Save a copy of images at a lower number of resolution.
1
Choose [Resize].
● Press the [
[Resize] on the [
2
Choose an image.
● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
3
Choose an image size.
● Press the [ ][ ] buttons to choose the
size, and then press the [ ] button.
● [Save new image?] is displayed.
4
Save the new image.
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
● The image is now saved as a new file.
Before Use
Basic Guide
Advanced Guide
1
2
3
Still Images Movies
4
5
] button and choose
6
] tab ( = 25).
7
8
9
Index
Camera Basics
Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
73