Protecting Images - Canon PowerShot SX420 IS User Manual

2
Choose an image.
● Press the [ ][ ][ ][ ] buttons to choose
the image you want to view next.
● Your chosen image is displayed in the
center, surrounded by the next four
candidate images.
● For full-screen display of the center
image, press the [ ] button. To restore
the original display, press the [ ] button
again.
● Press the [ ] button to restore
single-image display.
● Smart Shuffle is not available in the following cases:
- There are less than 50 shots taken with this camera
- An unsupported image is currently displayed
- Images are shown in filtered display ( = 64)

Protecting Images

Protect important images to prevent accidental erasure ( = 70).
● Press the [ ] button, and then choose
] in the menu ( = 24). [Protected]
[
is displayed.
● To untag the image, repeat this process
and choose [
the [ ] button.
● Protected images on a memory card will be erased if you format
the card ( = 109, = 110).
● Protected images cannot be erased using the camera's erasure
function. To erase them this way, first cancel protection.
Before Use
Basic Guide
Still Images Movies
Advanced Guide
1
2
] again, and then press
3
4
5
6
7
8
9
Index
Camera Basics
Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
67