Cub Cadet RT 75 Shop Manual page 48

RT 75
4. Remove and discard both of the cable ties from the
handle bar. See Figure 8.3.
5. Remove and discard the outer cotter pin that
secures the swivel rod to the swivel latch. See Fig-
ure 8.4.
NOTE: Do not remove the inner cotter pin.
6. Remove the swivel rod and washer.
7. Remove the handle adjustment crank. See Figure
8.5.
44
Figure 8.3
inner cotter pin
washer
Figure 8.4
handle adjustment crank
Figure 8.5
cable ties
outer cotter pin
handle mounting bolt