Samsung SND-L6012 User Manual page 15

Item
Internal Cover
a
Lens
b
Reset Button
c
Micro SD Memory
d
Card Compartment
PoE Connector
e
It is a cover to protect the main body.
Lens for the camera.
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
If you reset the camera, the network settings will be adjusted so that
J
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
Compartment for the Micro SD memory card.
Connects to the network and supplies power through Ethernet cable.
Description
English _15