Motorola SURFboard 570280-001-a User Manual page 40

Field
WAN Blocking
IPsec PassThrough
PPTP PassThrough
Remote Config Management
Multicast Enable
UPnP Enable
Rg PassThrough
PassThrough Mac Addresses
When done, click Apply to save your changes.
Advanced Pages • Advanced Options Page
Motorola SURFboard SBG941 Series Wireless Cable Modem Gateways • User Guide
570280-001-a
Field Descriptions for the Advanced Options Page
Description
Prevents the SBG941 Configuration Manager or the PCs
behind it from being visible to other computers on the SBG941
WAN.
Enable
Select
Enables the IPsec Pass-Through protocol to be used through
the SBG941 Configuration Manager so that a VPN device (or
software) may communicate properly with the WAN.
Enable
Select
Enables the Point-to-Point Tunneling Protocol (PPTP)
Pass-Through protocol to be used through the SBG941
Configuration Manager so that a VPN device (or software) may
communicate properly with the WAN.
Enable
Select
Allows remote access to the SBG941 Configuration Manager.
For example, in the browser URL window, type
http://WanIPAddress:8080/
Configuration Manager remotely.
Enable
Select
Allows multicast-specific traffic (denoted by a specific address)
to be passed to and from the PCs on the private network
behind the configuration manager.
Enable
Select
Turns on the Universal Plug and Play protocol (UPnP) agent in
the configuration manager. If you are running a CPE (client)
application that requires UPnP, select this box.
Enable
Select
Disables NAT operation allowing all client computers to act as
passthrough clients.
Enable
Select
Specifies up to 32 computers as passthrough clients not
subject to NAT, using their MAC addresses.
To enable this feature, your cable operator may need to
provide additional public IP addresses.
to turn on this option.
to turn on this option.
to turn on this option.
to access the SBG941
to turn on this option.
to turn on this option.
to turn on this option.
to turn on this option.
B
32