Sony sl-hf600 Owner's Manual page 37

STEPS
Press the OPEN button
to open
t h
JOG
dlal door.
,
1
Play back the orlglnal tape that you llke to record on.
2
At the point where you want to stop the Insertion to
be
made, press the I 1 (pause) button.
(If necessary, turn the JOG dlal or the SHUlTLE ring for
decldlng on the polnt more accurately.)
3
Press RESET button.
The tlme counter wlll be reset to "OHOMOOS".
4
Turn the JOG dlal or the SHUITLE rlng counterclock.
wise or press the
44
(rewind) button and at the polnt
where you dealre to start the lnsertlon, release the
dlal, ring or the button.
5 Turn on the audio andlor vldeo source that you have
connected.
6
For "Audio Insert", press AUDIO INSERT button.
For "Video Insert", press VIDEO INSERT button.
For "Audlo and Video insert", press VIDEO INSERT
button and then the AUDIO INSERT button.
When these buttons ere pressed, you
will
be
able to rnonltor the sound andlor
plcture of the canwted source.
7
Press the I I (pause) button.
The video andlor audlo Insertion wlil start.
Had theoriginal tape been recorded in the Beta hl-fl system,
and you are inserting new sound onto the tape, you
will
be
able to hear both the original audio recordings and the new
sound being inserted.
At the point where you have pressed the RESET button
in step
3,
the
recording
wlll stop.
The picture of the connected
video source
wlll
still
be
displayed even after the
Insertion
is
stopped.
Audio andlor video lnsertlon can be made simply by
stopplng the playback with the
I 1
(pause) button and
then going through steps
6
and
7,
however
,
remember
that the recording wlll stop at the polnt where the
counter reads "OHWMOOS".
To stop the Insertion that hsr starled,
press the (stop) button.
Notes
During the insertlon, the
b
(play),
4 4
(rewind) and
H (fast-forward) buttons wlll not
function.
If a microphone Is connected to the MIC jack, the
sound from the microphone wlll always be recorded
on the conventional audlo track.
Insertions can be made just as
described
above
wlthout settlng the AUDIO MONITOR selector to
"MIX", but you wlll only
be
able to hear either the new
sound being recorded or the orlglnally recorded
sound.
If the safety tab of the tape is removed, the cassette
indicator In thedlsplay window wlll bllnk when the IN-
SERT buttons are pressed and Insertion will not be
made.
AS the time counter does not work wlth blank tapes, if
there is a part that Is unrecorded In between the star-
ting and stopping polnts, the vldeo andlor audlo In-
sertlons wlll stop earller than the preset stopping
polnt by the amount of the unrecorded part.
Blank part of tape
Preset ktarting polnt
\ \
prAset stopping
As the result of insertions
Starting ioint
I~~~~~
1
Actual stopplng point
plcturelsound