Sony sl-hf600 Owner's Manual page 20

USE AND FUNCTIONS OF THE BUTTONS
Remote Mnror
Point the Commander here.
r
There should be no obstacle
between the Commander and
position.
the remote sensor.
The shorter the distance between
the Remote Commander and
the recorder, the wider the angle
within which the recorder can be
controlled.
POWER switch-
NlVTR button
*
Channel number buttons and
"ENTER" button*
INDEX button
4 Rewind button
H Fast-forward button
Channel + I - button*
Various playback buttons
REC (record) switch
REC HOLD (recording hold) switch
The
buttons
other than buttons
0,
0, @
and
@ will
0
Channel
number buttons and
"ENTER"
button
function the same as the buttons
on
the recorder with
Select channels. After presslng the digits of the
the simllar name or mark. (The auto play cannot
be
desired channel one by one, press
"ENTER"
button
operated.)
(See
page 11).
+The buttons marked with an
"*"
are buttons that can be
Note
used also on certaln Sony remote control N sets. To use Channel selection on certain Sony
N
sets can also be
these buttons on the N , set the nmot. contml TVNTR
made wlth these buttons in the slmllar way by setting the
(U~~CIOT to
"N"
and then direct the Commander to the remote control WNTR selector to "TV". With some
N
Remote control detector of the N. The buttons that can be models that have only
14
channel (program) positions,
used on the N ere iimited by the functions of your N. channel positions
1
through 9 will be selected simply by
pressing buttons "1" through "9", channel position 10 by
pressing " 0 . ' button, and channel position 12 by pressing
the "ENTER" button. For such models, use the channel + I -