Sony sl-hf600 Owner's Manual page 12

PRESETTING CHANNELS
PRESElllNG CHANNELS TO BE SELECTED
WITH THE CHANNEL +I- BUlTONS
Ineldo
tha
tunlng
wmpartmmt
ADD
button
ERASE
button
AUX PRESET
button
Adding channela
1 Select the channel to be added wlth the JOG dlal or
the Remote Commander.
2 Press ADD button.
A
"--"
will appear for an Instant In the channel dls-
play, lndlcatlng that the channel wlll appear In the
proper numerical sequence when you press the chan-
nel +I- button.
Repeat steps
1
and
2
for other channels to be added.
Erasing channels
1 Select the channel to be erased.
2
Press ERASE button.
A
"---
wlll appear for an Instant in the channel dl*
play, lndlcatlng that the channel has been erased.
When channel +I- button Is pressed, you wlll see that
the channel is sklpped over In the
numerical se.
quence.
Repeat steps
1
and
2
for other channels to be erased.
To add erased channels agaln, follow the steps In "Ad-
ding channels".
Non-exlstent channels (channels other than those llsted
on the prevlous page) cannot be preset and the
"--"
In-
dlcator wlll not appear when the ADD or ERASE button
is pressed.
TO PRESET THE OUTPUT CHANNEL OF THE
DECODER CONNECTED TO THE AUX TERMINAL
You can preset your VCR so that the channel recelved
through the decoder connected to, the AUX terminal can
be selected simply by presslng the AUX key on the VCR
or on the Remote Commander.
1
Select the output channel of the decoder (generally 3
or 4) by turnlng the JOG dlal.
2
Press AUX PRESET button.
A
"--"
will amear for an lnstant and then "PP(~reset
program)" wili appear In the channel dlsplay.
''
The output channel that you have selected In step 1
Is preset.
By presslng the AUX key Inside the JOG dlal door or
on the Remote Commander you wlll be able to vlew
the programs recelved through thedecoder. "PP" will
be displayed whenever thls channel is selected.
To return to vlewlng regular channels, simply select
another channel or press the AUX key agaln. (Selection
wlll start from
103
or
199
when the
JOG
dlsl Is turned.)
Insert cassettes gently Into the compartment until It
starts slldlng In. There should be a dlrectlon
on
the
cassette showlng in which way the cassette should be
Inserted.
The cassette indlwtor
wlll
light up.
The power of thls VCR wlll turn on automatlcally
whenever a cassette is newly inserted.
To ejrct the cassette, press the EJECT button.
The cassette Indicator wlll turn off.
If the EJECT button Is pressed when the power Is turned
off, the power wlll turn on for the cassette to
ba
ejected
and then turn off agaln automatlcally.
USE OF THE SAFETY TAB
When a new recordlng Is made on a prevlously recorded
cassette, the prevlous recordlng wlll be automatlcally
erased.
To avdd mslng Me ncordlng
Break off the safety tab uslng a screwdriver or similar
object. m e cassette will be ejected automatically when
you slide the REC (recording) swltch to the rlght.
TO
rrncord on a caueno wh~ch has had its safety tab
removed
Cover the hole wlth a piece of plastic tape.
If you deslre to select the decoder's channel wlth the
TV's channel selectors wlthout uslng the VCR, slmply
press the AUX key so that "PP" Is IIt (It will llght up even
wlthout the power turned on), then select the channel.