Connecting An A/V Receiver, Tv, And Vcr - Motorola QIP6200/QIP64xx User Manual

Connecting an A/V Receiver, TV, and VCR

If your equipment supports it:
•
The optical (square
connector) audio outputs may be used in place of the stereo audio
outputs (
AUDIO R
level of audio quality, including support for Dolby Digital 5:1
surround sound.
•
S-video connections may be used in place of the standard RCA
video connections. In most cases, S-video offers a higher level of
standard definition video quality than RCA video.
This video connection method does not support HD video. For
connecting an HDTV, see "Connecting Your Set-Top to an HDTV –
Video Only."
Connect an RF coaxial cable to the service provider's wall outlet
1
and to the
Connect a stereo audio cable to the
2
on the set-top and to the
A/V receiver.
Connect a video cable to the
3
and to the
Connect a stereo audio cable to the
4
connectors on the A/V receiver and to the
connectors on the stereo VCR.
Connect a stereo audio cable to the
5
connectors on the stereo VCR and to the
connectors on the A/V receiver.
Connect a video cable to the
6
VCR and to the
Connect a video cable to the
7
VCR and to the
Connect a video cable to the
8
TV and to the
receiver.
connector) or coaxial (round
SPDIF
and L). In most cases, these outputs offer a higher
connector on the set-top.
CABLE IN
INPUT R
/
CABLE TV VIDEO
VIDEO VCR OUT
VIDEO VCR IN
/
TV MONITOR OUTPUT VIDEO
AUDIO OUT R
and connectors on the
L
connector on the set-top
VIDEO OUT
connector on the A/V receiver.
VCR AUDIO OUT R
OUTPUT AUDIO OUT R
VCR AUDIO IN R
connector on the stereo
INPUT VIDEO
connector on the A/V receiver.
OUTPUT VIDEO
connector on the A/V receiver.
connector on the stereo
INPUT VIDEO
connector on the A/V
36
SPDIF
and connectors
L
and
L
and
INPUT AUDIO R
and
and
connector on the stereo
L
L
L